corbelTestPlace

SX167 - Axxent Plain Duropolymer Base Molding, Primed White. Length: 78-3/4" Height: 6-7/8"

Title:SX167 - Axxent Plain Duropolymer Base Molding, Primed White. Length: 78-3/4" Height: 6-7/8"
Id:3518484316265
Handle:base-moulding-4-1-2in6-1-8in2-3-4in-sx167
Type:Base Moulding
Vendor:Outwater-ORAC
Price:2721
Price Min:2721
Compare at Price Min:3665
Price Max:2721
Compare At Price Max:3665
Price Varies:false
Compare at price varies:false
Url:/products/base-moulding-4-1-2in6-1-8in2-3-4in-sx167
Description:

[[start tab]]

Description

  • Lightweight
  • Impact Resistant
  • Easy to Install
  • Code : Luxxus
  • Style : Classic
  • Material : Polyurethane

        [[end tab]]

        [[start tab]]

        Measurements

         

        Length : 78-3/4"


        Height : 6-7/8"

        Projection : 1-3/4"



        [[end tab]]

        [[start tab]]

        Installation



        1. SURFACE - CEILING - WALL


        2. WORKING CONDITIONS

        Storage & Installation conditions for Orac Decor products and Decofix.

        Place profiles & adhesives at room temperature 24 hrs before installation.

        Use Decofix Pro for porous or Decofix Hydro for non-porous surfaces.

        Extra attention for glues on wallpaper !!!

        Preferably use DecoFix Hydro & Decofix Extra for new-build projects.

        Adhesion of paint or plaster on wall must be perfect

        When in doubt about surface, please contact Orac.

        Only full guarantee with Decofix.


        3. GLUES


        DecoFix Pro

        FDP500 310ml

        • 7 - 8m

        FDP600 4200ml

        • 65 - 110m
        • Strong,water-based acrylic glue
        • Long-lasting seal between mouldings and the wall and/or ceiling
        • For interior applications and porous surfaces ( not for humid spaces or outside)
        • Remove with humid sponge or cloth
        • Should be kept frost free

        DecoFix Extra

        FX200 310ml

        • min. 80m

        FX210 80ml

        • min. 20m
        • Polyurethane-based glue
        • Seam joints between the mouldings
        • Remove excess glue before hardening ( max. 1 hours and repeat after 2-3 hours)
        • Clean with acetone or Synth Thinner
        • Can be painted after 24 hrs
        • The more humidity, the faster the drying time

        DecoFix Hydro

        FDP700 290 ml

        • 7 - 8 m
        • Extra strong MS polymer glue
        • For exterior applications, damp environments, non-porous surfaces (tiles, glass, ...)
        • Remove with soap solution

        4. INSTALLATION

         

        Inner Corner

         

        Outer Corner

         

         

        NOTES TO REMEMBER:

        • Joints have to be dust free.
        • Use DecoFix Hydro for exterior applications, humid areas, non-porous surfaces and for newly build houses with high humidity and low temperature
        • DecoFix Pro or Hydro should be used over the complete length of the profiles and the full width of the gluing area
        • The V-Fix is only for guiding the nozzle
        • Push products firmly and evenly against the wall and ceiling ( every 10 cm)
        • Use stainless steel nails to support bigger profiles and indirect-lighting profiles.
        • Use DecoFix Extra in every joint (not only for corners) on one side of the profiles already installed.
        • Apply enough DecoFix Extra; excess must come out of the front and the back.
        • Wipe of with acetone or similar product.

        [[end tab]]
        Content:

        [[start tab]]

        Description

        • Lightweight
        • Impact Resistant
        • Easy to Install
        • Code : Luxxus
        • Style : Classic
        • Material : Polyurethane

              [[end tab]]

              [[start tab]]

              Measurements

               

              Length : 78-3/4"


              Height : 6-7/8"

              Projection : 1-3/4"



              [[end tab]]

              [[start tab]]

              Installation



              1. SURFACE - CEILING - WALL


              2. WORKING CONDITIONS

              Storage & Installation conditions for Orac Decor products and Decofix.

              Place profiles & adhesives at room temperature 24 hrs before installation.

              Use Decofix Pro for porous or Decofix Hydro for non-porous surfaces.

              Extra attention for glues on wallpaper !!!

              Preferably use DecoFix Hydro & Decofix Extra for new-build projects.

              Adhesion of paint or plaster on wall must be perfect

              When in doubt about surface, please contact Orac.

              Only full guarantee with Decofix.


              3. GLUES


              DecoFix Pro

              FDP500 310ml

              • 7 - 8m

              FDP600 4200ml

              • 65 - 110m
              • Strong,water-based acrylic glue
              • Long-lasting seal between mouldings and the wall and/or ceiling
              • For interior applications and porous surfaces ( not for humid spaces or outside)
              • Remove with humid sponge or cloth
              • Should be kept frost free

              DecoFix Extra

              FX200 310ml

              • min. 80m

              FX210 80ml

              • min. 20m
              • Polyurethane-based glue
              • Seam joints between the mouldings
              • Remove excess glue before hardening ( max. 1 hours and repeat after 2-3 hours)
              • Clean with acetone or Synth Thinner
              • Can be painted after 24 hrs
              • The more humidity, the faster the drying time

              DecoFix Hydro

              FDP700 290 ml

              • 7 - 8 m
              • Extra strong MS polymer glue
              • For exterior applications, damp environments, non-porous surfaces (tiles, glass, ...)
              • Remove with soap solution

              4. INSTALLATION

               

              Inner Corner

               

              Outer Corner

               

               

              NOTES TO REMEMBER:

              • Joints have to be dust free.
              • Use DecoFix Hydro for exterior applications, humid areas, non-porous surfaces and for newly build houses with high humidity and low temperature
              • DecoFix Pro or Hydro should be used over the complete length of the profiles and the full width of the gluing area
              • The V-Fix is only for guiding the nozzle
              • Push products firmly and evenly against the wall and ceiling ( every 10 cm)
              • Use stainless steel nails to support bigger profiles and indirect-lighting profiles.
              • Use DecoFix Extra in every joint (not only for corners) on one side of the profiles already installed.
              • Apply enough DecoFix Extra; excess must come out of the front and the back.
              • Wipe of with acetone or similar product.

              [[end tab]]
              Tags:1-3-46-7-878-3-4outwater-oracunder-100under-500

              [[start tab]]

              Description

              • Lightweight
              • Impact Resistant
              • Easy to Install
              • Code : Luxxus
              • Style : Classic
              • Material : Polyurethane

                    [[end tab]]

                    [[start tab]]

                    Measurements

                     

                    Length : 78-3/4"


                    Height : 6-7/8"

                    Projection : 1-3/4"



                    [[end tab]]

                    [[start tab]]

                    Installation



                    1. SURFACE - CEILING - WALL


                    2. WORKING CONDITIONS

                    Storage & Installation conditions for Orac Decor products and Decofix.

                    Place profiles & adhesives at room temperature 24 hrs before installation.

                    Use Decofix Pro for porous or Decofix Hydro for non-porous surfaces.

                    Extra attention for glues on wallpaper !!!

                    Preferably use DecoFix Hydro & Decofix Extra for new-build projects.

                    Adhesion of paint or plaster on wall must be perfect

                    When in doubt about surface, please contact Orac.

                    Only full guarantee with Decofix.


                    3. GLUES


                    DecoFix Pro

                    FDP500 310ml

                    • 7 - 8m

                    FDP600 4200ml

                    • 65 - 110m
                    • Strong,water-based acrylic glue
                    • Long-lasting seal between mouldings and the wall and/or ceiling
                    • For interior applications and porous surfaces ( not for humid spaces or outside)
                    • Remove with humid sponge or cloth
                    • Should be kept frost free

                    DecoFix Extra

                    FX200 310ml

                    • min. 80m

                    FX210 80ml

                    • min. 20m
                    • Polyurethane-based glue
                    • Seam joints between the mouldings
                    • Remove excess glue before hardening ( max. 1 hours and repeat after 2-3 hours)
                    • Clean with acetone or Synth Thinner
                    • Can be painted after 24 hrs
                    • The more humidity, the faster the drying time

                    DecoFix Hydro

                    FDP700 290 ml

                    • 7 - 8 m
                    • Extra strong MS polymer glue
                    • For exterior applications, damp environments, non-porous surfaces (tiles, glass, ...)
                    • Remove with soap solution

                    4. INSTALLATION

                     

                    Inner Corner

                     

                    Outer Corner

                     

                     

                    NOTES TO REMEMBER:

                    • Joints have to be dust free.
                    • Use DecoFix Hydro for exterior applications, humid areas, non-porous surfaces and for newly build houses with high humidity and low temperature
                    • DecoFix Pro or Hydro should be used over the complete length of the profiles and the full width of the gluing area
                    • The V-Fix is only for guiding the nozzle
                    • Push products firmly and evenly against the wall and ceiling ( every 10 cm)
                    • Use stainless steel nails to support bigger profiles and indirect-lighting profiles.
                    • Use DecoFix Extra in every joint (not only for corners) on one side of the profiles already installed.
                    • Apply enough DecoFix Extra; excess must come out of the front and the back.
                    • Wipe of with acetone or similar product.

                    [[end tab]]

                    First Post

                    This is your store’s blog. You can use it to talk about new product launches, experiences, tips or other news you want your customers to read about. You can check...